Septic System Digester is a natural
product, designed to eat and digest all of the organic solids in your
septic tank and septic field. The bacteria in
Septic System Digester has multiple enzymes to jump start the
bacterial action. Here's how it works -
The
bacteria start growing when they are exposed to food and water.
About every 30 minutes the bacteria split into 2 bacteria. When
they do this they create an enzyme. The enzymes break the food down
small enough for the bacteria to eat and digest. The bacteria turn
the food into water and carbon dioxide. Then it goes into the
septic field and soaks into the ground. This is a natural process,
Nature's Way.
Directions:
Septic Tanks:
Initial
Treatment: For new systems, use 4 ounces for each 1500
gallons of capacity. Mix into 2 gallons of warm water and
flush through toilet furthest from tank.
Re-Treatment: Each month use 2 ounces per 1000 gallons
of capacity. Apply as above.
Septic Fields:
Treat with 1
quart (32 oz) Septic System
Digester for small fields, 2 quarts for large
fields. Mix with 1 gallon warm water, pour directly into
septic tank if possible, or into drain nearest tank and run
warm water for 5 to 10 minutes, letting septic tank overflow
into septic field.
Cess Pools:
Treat same
as septic tanks.
Lagoons:
10,000 to
100,000 gallons, 1 quart to begin and one quart each week.
Drain maintenance:
(Including
disposals, toilets, grease traps, etc) This product
performs best when it is allowed to work uninterrupted.
Treat drains while they are not in use, such as just before
bedtime. Whenever possible, run warm water (not hot)
through the drain for 1 minute prior to application. Add 6
ounces of Septic System Digester
directly into the drain opening. For maximum
performance, do not use for 6 hours. Repeat application as
necessary.
Garbage Disposals:
To help
eliminate mal-0dors in garbage disposals, run hot water thru
disposal for 30 seconds. Turn off water then pour 4 ounces
of Septic System Digester
down drain. Best time is at bedtime, when not in use.